Figure 19: Primepower Serverview Window:"Create User" (Administrator Of Primepower Serverview) - Fujitsu Siemens Computers SX series User Manual

User groups and logins
d) Create the new user (e.g. user name pwsvadm)
54
Figure 19: PRIMEPOWER ServerView window:"Create user" (administrator of PRIMEPOWER
ServerView)
As the user is not to be allocated special SCS privileges, the user must be assigned
as a member of the primary user group other. The SMC must be selected as the
node.
To permit PRIMEPOWER ServerView to be operated in write mode under this ID at
a later time the user ID must be entered in the secondary user group wsauser which
is defined for this purpose. If you wish to operate PRIMEPOWER ServerView only
in read mode, the secondary user group wsaruser must be selected. Membership in
one of the two user groups wsauser or wsaruser ensures that this user group runs
within PRIMEPOWER ServerView with root authorization
To do this you must select the secondary user group from the window and add it
using the Add button.
Functions of the System Management Console
U41272-J-Z385-3-76