Fujitsu Siemens Computers SX series User Manual page 215

The X2000 user interface
BS2 KVP
When the tab BS2-KVP is activated, all configured KVPs (console distribution program) are
listed. The KVP is responsible for the BS2 console inputs and outputs. A KVP always
consists of 2 devices (write and read path), and in the event of modifications the write path
must always be clicked. A new KVP is required if an additional guest system is set up. The
KVP is identified by the KVP name which consists of 3 characters. The KVP for the native
system or monitor system is already active after the installation, is called Hypervisor-KVP
and has the name HV0. All further KVPs must be set up via tab BS2-KVP.
Create (A)
A KVP can be configured.
Modify (A)
The selected KVP is displayed and can be modified.
Delete (A)
The highlighted KVPs are deleted.
Show or modify user ids (G)
The KVP user IDs are displayed and can be modified.
Show or modify logging files (G)
The existing KVP logging files are listed. You can now display, delete or create
additional logging files.
Show or modify logging options (G)
The properties of the logging process are displayed and can be modified.
Start KVP (G)
The selected KVP system is started.
Stop KVP (G)
The selected KVP system is stopped.
Activate new configuration (G)
The changes to the KVP system (logging, user IDs etc.) are activated.
Configuration of automatic IPL (G)
The automatic startup of the BS2000 (applies only to the native system or monitor
system) can be configured. This means that BS2000 will be started automatically after
loading of X2000 is complete.
System add (X)
A new KVP system can be added. The KVP must already have been configured.
System delete (X)
The selected KVP system is deleted.
U41272-J-Z385-3-76
X2000 BS2Devices main window
215