Displaying The Occupancy Status Of An Mtc Device - Fujitsu Siemens Computers SX series User Manual

Magnetic tape cartridge devices

9.4.6 Displaying the occupancy status of an MTC device

The following EVENT command (see also
occupancy status of an MTC device for the BS2000 systems on the Switched nodes list:
sx.bs2mtcfetch -l tape-MN
-l
tape-MN
Extra information:
A single line for each BS2000 system on the Switched nodes list line is output under the
following header:
HOST
HOST
STATE
DAEMON
SEMA
F
X
HH
UU
MN
DEVTYPE
PATH
240
List option. The status information listed below is displayed.
Mnemonic name of the BS2000 device.
STATE DAEMON
Name of the BS2000 system
The possible entries here are:
Device can be used
fetched
Device is released for other systems
released
ID of the daemon process
ID of a process which initiated the task of occupying the device for the
BS2000 system
A value > 0 indicates that the "Force" option is active.
X2000-internal characteristic
Host connector number of the BS2000 device
Unit number of the BS2000 device
Mnemonic name of the BS2000 device.
X2000 type class of the device
X2000 path of the device
section "MTC devices" on page
SEMA F XHH_UU MN DEVTYPE PATH
Global X2000 functions
193) displays the
U41272-J-Z385-3-76