Fujitsu Siemens Computers SX series User Manual page 377

X2000 messages
..TM001 wrong channel selection <chpid> (CHPID)
The message ..TM001 is also output.
Meaning
Warning: The formally incorrect CHPID <chpid> was specified (outside the number ranges
80...8E and 90...FF).
..TM001 no related channel for CHPID <chpid>
The message ..TM001 is also output.
Meaning
Warning: No channel exists for the specified CHPID <chpid>.
..TM001 option (-d, -l or -q) will be set twice
The message ..TM001 is also output.
Meaning
Warning: More than one of the options -d, -l or -q was specified.
..TM001 channel selection (CHPID) will be set twice
The message ..TM001 is also output.
Meaning
Warning: Two CHPIDs were specified.
..TM001 empty repetition count
The message ..TM001 is also output.
Meaning
Warning: The -r option but no repetition counter was specified.
..TM001 wrong repetition count
The message ..TM001 is also output.
Meaning
Warning: The repetition counter has not been specified in decimal form or is greater than
9999.
..TM001 repetition count will be set twice
The message ..TM001 is also output.
Meaning
Warning: A repetition counter has been specified twice.
U41272-J-Z385-3-76
X2000 channel connection error messages
377