Figure 45: Xconfig: Start Window; Configuration And Operation - Fujitsu Siemens Computers SX series User Manual

Remote operation via PC

6.2 Configuration and operation

This section describes the configuration and operation of Exceed, PRIMEPOWER
ServerView, SINIX-TE and the 9750 terminal emulation.
Exceed
The configuration of the Exceed X server is described below. The X server is used to access
the CDE user interface of the current console.
The X server is configured using the Xconfig program. This can be started via a corre-
sponding entry in the Windows start menu (Start -> Programs -> Hummingbird Connectivity ->
Exceed -> Xconfig).
Xconfig start window:

Figure 45: Xconfig: Start window

U41272-J-Z385-3-76
Configuration and operation
135