Fujitsu Siemens Computers SX series User Manual page 311

Dynamic Reconfiguration
3. bs2drstat [sb<SB-Name>]
The
bs2drstat
DR-disconnect of the system board and specifies whether the DR-disconnect is possible
from the X2000 viewpoint. If the command is called without an argument a menu for
selecting the system board is offered.
Example 1
CPU-XSB 01-3 can be released with DR-disconnect.
# bs2drstat sb01-3
Please wait . . . . . . . . . . . . . . . .
--------------------------------------------------------------------------------
System board
Processors
Memory
BS2000 channels
Network interfaces I/O sys. (name) : none
Disk mirrors (c<ctl>t<tgt>d<lun>)
PowerPath targets (c<ctl>t<tgt>)
BS2000 disks (mnemonic)
BS2000 tapes (mnemonic)
ZAS-LAN (mnemonic)
BS2000 printers (mnemonic)
=========
DR status
=========
Nothing found that will prevent the disconnection of the system board.
Example 2
XSB 01-1 cannot be released with DR-disconnect because of the resources it contains
– memory, I/O devices of the type UHPS and boot disk.
# bs2drstat sb01-1
Please wait . . . . . . . . . . . . . . . . . . .
--------------------------------------------------------------------------------
System board
Processors
Memory
BS2000 channels
Network interfaces I/O sys. (name) : none
Disk mirrors (c<ctl>t<tgt>d<lun>)
PowerPath targets (c<ctl>t<tgt>)
BS2000 disks (mnemonic)
BS2000 tapes (mnemonic)
ZAS-LAN (mnemonic)
BS2000 printers (mnemonic)
=========
DR status
=========
1) removing of memory not supported
2) A system board with UHPS connectors and/or channels cannot be removed.
3) Current bootdisk is affected but there is no other mirrordisk.
The disconnection of the system board will fail.
U41272-J-Z385-3-76
command lists the BS2000 resources which are lost in the partition due to
: name: 01-3 number: 13
: CPU: 0 IOP: 0 CRYPT: 0
: BS2000: 0M I/O: 0M
: UHPS connector: 0
: none
: none
: 1500 1501 1502 1503 1504 1505 1506 1510
1511 1512 1513 1514 1515 1516
: A093 A094 A095 A096 A097 A098 A099 A09A
TH TI
: none
: none
: name: 01-1 number: 5
: CPU: 0 IOP: 0 CRYPT: 0
: BS2000: 0M I/O: 4096M
: UHPS connector: 2
: c1t0d0
: c13t12
: 1110 1111 1112 1113 1114 1115 1116
: none
: none
: none
Performing DR
mode: XSB (1/4 PSB)
spare: 2
non-UHPS channel: 0
mode: XSB (1/4 PSB)
spare: 2
non-UHPS channel: 26
311