Available Functions; Function Types - Fujitsu Siemens Computers SX series User Manual

The X2000 user interface
8.4.1.2

Available functions

Whether or not a function is available depends on a number of factors:
Pull-down or context menu
The two menus can show different functions from each other. The functions are
dependent on which devices are currently highlighted (see below) and, in some cases,
on which subtab has been selected (see below).
Device(s) highlighted or not highlighted
If one or more devices are highlighted (selected) then device-specific functions are
presented in the menus. These functions apply only to the highlighted devices.
Selected subtab
Subtabs are available whenever you select one of the following tabs:
–
–
–
–
Different functions are available depending on the selected subtab.
8.4.1.3

Function types

Various types of function are available for X2000 operation:
General functions
These functions are available throughout PRIMEPOWER ServerView Suite. They are:
–
–
–
–
i
U41272-J-Z385-3-76
BS2 Disks
Volumes+Pubsets
BS2 Tapes
BS2 Printers
Create
Modify
Delete
Clone
The Create function is not available in the drop-down menu.
The Modify and Delete functions are only available if one or more devices are
highlighted and if the device properties permit the use of these functions.
The Clone function is never available in the X2000 user interface.
X2000 BS2Devices main window
209