Fujitsu Siemens Computers SX series User Manual page 74

Sx150 business server
Table of Contents

Advertisement

Functions of the System Console Software (SCS)
Switching a partition off
A partition is switched off using the following SCS command:
/opt/FJSVcsl/bin/node_control -down <machine_name> -pid=<partition ID>
Example
/opt/FJSVcsl/bin/node_control -down fernando0 -pid=1
In this case any Solaris system which is still running is closed down in an orderly manner
and the power supply to this partition is interrupted. This procedure can take about
1 minute.
In BS2000 partitions any BS2000 system which is still running will be shut down and X2000
then closed down. A prerequisite here is that shutdown is really specified in the BS2-KVP
register of the Bs2Devices application of PRIMEPOWER ServerView under "Definition of the
BS2000 shutdown command".
Comments
The Auto Power Control System of SCS (APCS, see the
on/off on a scheduled basis" on page
on/off on a time-driven basis .
Machine Administration Menu (System-Specific Administration -> select machine_name ->
System/Partition Power Administration) enables a partition to be switched on or off, but not
on a time-driven basis.
Information functions
The power on/off status of one or more server partitions, together with system-board-
specific information, can be ascertained using the following function:
/opt/FJSVcsl/bin/get_node_conf <machine_name> -s [-pid=<partition ID>]
Example
/opt/FJSVcsl/bin/get_node_conf fernando0 -s
root@fernandoADM # /opt/FJSVcsl/bin/get_node_conf fernando0 -s
SB#00-0:type=1,pid=00,serial=PB350A0403,status=ON
SB#00-1:type=1,pid=00,serial=PB350A0403,status=ON
SB#00-2:type=1,pid=01,serial=PB350A0403,status=OFF
SB#00-3:type=1,pid=01,serial=PB350A0403,status=OFF
SB#01-0:type=1,pid=02,serial=PB350A0603,status=ON
SB#01-1:type=1,pid=02,serial=PB350A0603,status=ON
SB#01-2:type=1,pid=00,serial=PB350A0603,status=ON
SB#01-3:type=1,pid=00,serial=PB350A0603,status=ON
root@fernandoADM #
74
Functions of the System Management Console
section "Switching the server
66) can only be used to switch the entire server
U41272-J-Z385-3-76

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents