Administration Of Primepower Serverview - Fujitsu Siemens Computers SX series User Manual

Functions of the System Management Console
2. Set up the SCS user interface (Terminal in the Application Manager) for the user ID
using the following command (which must be executed with root authorization):
/opt/FJSVscsl/bin/scslowneradd -h <server name_of_partition>:clmon <user
name>
In the next step you must remove the assignment of administration rights to a partition
which was needed temporarily to set up the SCS user interface. Proceed as follows:
3. Remove partition administration rights
The entry generated by the command scslowneradd in the file /etc/FJSVclowners
must be removed using an editor (e.g. vi).
The line to be deleted comprises an entry with the following format:
clmon:<server name of partition>.

4.1.4 Administration of PRIMEPOWER ServerView

The actions described under item 1 are required to set up a user ID which has no extended
rights with regard to the hardware administration of the server and can be operated under
PRIMEPOWER ServerView.
As of PRIMEPOWER ServerView Suite V2.2B it is possible to define the access rights of
this user ID with regard to access to applications in PRIMEPOWER ServerView and the
access to nodes of the administration domain more precisely (see item
information required for this is provided in the
Access Control" on page
1. Setting up the user ID with PRIMEPOWER ServerView in the primary user group other
or in a user group defined by the user (a user group can be generated in the Groups tab
in the Users group by clicking on the Groups button):
a) Start PRIMEPOWER ServerView (see the
b) Select the Users application.
c) Select Users -> Create in the menu bar.
U41272-J-Z385-3-76
201ff.
ServerView Suite" on page
section "Privilege concept with Role-Based
section "Starting PRIMEPOWER
196)
User groups and logins
2 on page 55). The
53