Dynamic Reconfiguration
DR-connect integrates the XSB in this receiving partition.
The Move action is a cross-partition action comprising one of the simple actions
DR-connect and DR-disconnect and is only possible on the SMC in PRIMEPOWER
ServerView.
The action is started for the partition which releases the XSB.
Example
Figure 116: Shifting an XSB (example)
In the above example XSB 00-1 (here named Systemboard_0-2) is removed from the node
demeterADM (PID 1) and assigned to the node daphneADM (PID 2).
The DR action is to take place immediately. The shift could also take place after a reboot,
in which case both nodes concerned would have to be rebooted – first demeterADM and
then venusADM.
U41272-J-Z385-3-76
Performing DR
307