Create X2000 Diagnostic Documents - Fujitsu Siemens Computers SX series User Manual

What if ...
sx.diag sinixatt
An attempt is made to deactivate all the bus devices.
!
sx.diag sinixatt <chn> <unit>
The device with this chn-no./unit-no. is activated. In the case of a dual device (with
KVP/LAN), both devices are activated. A corresponding message is output.
i

12.3 Create X2000 diagnostic documents

You can use the save_diag or sx.save_diag command to create diagnostic documents
and save these to a file. The most important X2000 data is written to a compressed file.
Command call
under root:
under EVENT:
Call formats
save_diag
The diagnostic files are saved to one of the directories
/var/opt/SMAW/X2000/SAVE_DIAG[0-9].
i
save_diag remove <number>
The directory named SAVE_DIAG<number> is deleted.
save_diag show
The save files are output sorted by date.
U41272-J-Z385-3-76
CAUTION!
Since all the devices have already been deactivated, there is a risk that
BS2000 will crash.
The chn/unit-no. must be entered in hexadecimal form.
Example: sx.diag sinixatt 0 3d
/opt/SMAW/X2000/bin/save_diag
sx.save_diag
Every time you call save_diag, a new directory is created. A maximum of
10 directories can be created. After this, you must delete a directory before
creating another.
Create X2000 diagnostic documents
337