Possible Event Commands; Querying The Version Numbers Of The Installed X2000/Solaris Software; Information On Patches - Fujitsu Siemens Computers SX series User Manual

EVENT mode

7.4.1 Possible EVENT commands

You can display the valid EVENT commands together with the available parameters on
screen:
ev.? Ú
Ê

7.4.2 Querying the version numbers of the installed X2000/Solaris software

You can output the version numbers of the installed X2000/Solaris software:
Ê ev.infoË[<name>Ë...][Ë-p] [Ë-f]Ú
Meaning:
If you need to contact the service staff, the version number of the installed
X2000/Solaris software can be useful.

7.4.3 Information on patches

You can output information on all installed patches (single correction for Solaris):
ev.infoeks [-p][Ë-f] Ú
Ê
Meaning:
If you need to contact the service staff, the version number of the installed Solaris software
and the version number of the patches can be useful.
192
Name of a software package. If no name is specified, information
name
on the installed software packages CMX and EMDS is output.
Then the X2000 system version and information on the X2000
system are output.
Output is sent to a printer and not to the screen.
p
f The information is output to a file:
/var/opt/SMAW/X2000/diag/event_info
The outputs are always appended to the file
Output is sent to a printer and not to the screen.
p
f The information is output to a file:
/var/opt/SMAW/X2000/diag/event_info
The outputs are always appended to the file
Operating BS2000 instances
U41272-J-Z385-3-76