X2000 channel connection error messages
13.5.5.8
ctest messages
ctest message code:
<B-type>
<D-no>
<busid>
<cabid>
<chpid>
<rep>
<slotid>
<test>
..TM001
usage description
usage : Format: -q
<CHPID>
<test number 1>
<test number 2>
<repetition count> -> 1...9999 (default: 1)
Meaning
Basic or additional information: The message is output together with all the error messages
with the number ..TM001 and specifies the possible arguments.
Optional arguments are specified in square brackets.
..TM001
no arguments
The message ..TM001 is also output.
Meaning
Warning: No arguments were specified when calling the ctest program.
..TM001
too many arguments
The message ..TM001 is also output.
Meaning
Warning: Too many arguments were specified when calling the ctest program.
..TM001
empty channel selection (CHPID)
The message ..TM001 is also output.
Meaning
Warning: The -k option but no CHPID was specified.
376
Board type
D number (PCB number)
Bus identification
Cabinet identification
Channel path identification (CHPID)
Repetition count
Slot identification
Test number
-d -k <CHPID> [-t <test number 1>][ -r <repetition count>]
-l -k <CHPID> [-t <test number 2>][ -r <repetition count>]
-> 0x80...0x8e, 0x90...0xff
-> 1...4
-> 1...2, 4 (default: 0 = all tests)
(default: 0 = all tests)
X2000 messages
U41272-J-Z385-3-76