Fujitsu Siemens Computers SX series User Manual page 55

Functions of the System Management Console
2. After this it may be necessary to adjust the access rights to the applications of
PRIMEPOWER ServerView and the nodes of the administration domain.
In the following cases such a user ID is automatically assigned the full access rights to
all available applications of PRIMEPOWER ServerView and to all nodes of the
administration domain:
If the RBAC feature is activated in PRIMEPOWER ServerView when the user ID is
created, the user ID is not assigned access rights to the PRIMEPOWER ServerView
applications or the nodes of the application domain. These rights must then be set
accordingly.
The interface for checking, setting, and modifying the RBAC access rights is described
in the
U41272-J-Z385-3-76
Use of PRIMEPOWER ServerView Suite Version < V2.2B
When the user ID is created the feature Role Based Access Control (RBAC) is not
activated in PRIMEPOWER ServerView.
section "Privilege concept with Role-Based Access Control" on page
User groups and logins
201ff.
55