Switching The Server On/Off On A Scheduled Basis - Fujitsu Siemens Computers SX series User Manual

Functions of the System Console Software (SCS)
4.3.1.2

Switching the server on/off on a scheduled basis

The automatic power control system (APCS: ) switches the server on or off automatically,
on the basis of a series of on/off schedule entries. These entries form the system schedule.
Switching on/off thus affects all partitions of the server.
Switching on automatically starts the operating system of the partition if the mode selector
of the system is in the LOCK position (normal mode) (see sections
server
the server off in this switch position shuts down the operating system. For BS2000/OSD
partitions, this involves starting/shutting down the carrier system X2000.
For an automatic IPL (Initial Program Load) of BS2000 on switching on the server (see
"Configuration of automatic IPL
(see "Evaluation of shutdown
entries must be made in the KVP menu.
Ê Select System-Specific Administration from the Machine Administration Menu (see
on page
1 <RETURN>
Select the required server.
Ê
66
on" on page 62 and "Mode selector" in the SX1xx Operating Manual [2]). Switching
58):
Functions of the System Management Console
(G)" on page 215) or for an automatic shutdown of BS2000
(X)" on page 216) on switching off the server, the relevant
"Switching the entire
figure 21
U41272-J-Z385-3-76