Fujitsu Siemens Computers SX series User Manual page 373

X2000 messages
..MM004 ioctl (<request>) failed, .......
The system error message is appended to the message.
Meaning
Software error: The IOCTL request <request> has been aborted.
..MM005 end of channeld by SIGTERM
Meaning
Runtime message: The daemon was terminated by the signal SIGTERM.
..MM006 <Dfunc>: sigaction() failed
Meaning
Software error: Signal processing sigaction was incorrect in the daemon function
<Dfunc>.
..MM201 illegal opcode from IOD (<IOrequest>)
Meaning
Software error: The request sent by the IOD <IOrequest> (two characters) is undefined.
..MM202 illegal mssf call (<SYrequest>)
Meaning
Software error: The request sent by the system <SYrequest> (eight characters) is
undefined.
..MM220 GENSTOP activated
Meaning
Runtime message: GENSTOP is activated and all channels have been stopped.
..MM294 fwrite() failed '<Fname>'
Meaning
File error: The file <Fname> could not be written. The file rights may have been set incor-
rectly or the file system may be defective or full.
..MM296 fread() failed '<Fname>'
Meaning
File error: The file <Fname> could not be read. There is an error in the file format or the file
system.
..MM297 fopen() failed '<Fname>'
Meaning
File error/software error: The file <Fname> could not be opened. The path rights may have
been set incorrectly, the file system may be defective or full or the file may have been
deleted.
U41272-J-Z385-3-76
X2000 channel connection error messages
373