Starting Primepower Serverview Suite - Fujitsu Siemens Computers SX series User Manual

Starting PRIMEPOWER ServerView Suite

8.2 Starting PRIMEPOWER ServerView Suite
You can call PRIMEPOWER ServerView Suite in write mode or read mode. You should note
that an application (e.g. VConfig or Bs2Devices) can only be called in write mode by one user
in the domain at any one time. If other users want to start the same application then they
will have to start it in read mode.
i
Operation can be performed:
via the hardware console (SMC) of an SX server with SMC
via the local console (or LAN console) of an SX server entry-level model
via an administration PC
–
–
–
–
Starting PRIMEPOWER ServerView at the SX hardware console
Icons have already been created on the CDE interface of the SMC for the predefined logins
sxadmin and bs2admin. Use these to call PRIMEPOWER ServerView. The icons provide a
simple, reliable method for calling PRIMEPOWER ServerView locally from the hardware
console or remotely from a PC or the X server.
196
Write protection in a domain applies to all the management servers!
using an X server in the Solaris-CDE interface similar to the hardware console
using a browser or Java Web Start.
via the PC's start menu
using the icon for a PC application on the desktop
The X2000 user interface
U41272-J-Z385-3-76