Figure 32: Machine Administration Menu: "Hardware Configuration Displays - Fujitsu Siemens Computers SX series User Manual

Functions of the System Console Software (SCS)
Now you can call up information on the hardware and partition configuration:
Server hardware configuration
After selecting Hardware Configuration Displays, the following menu is opened. This
example is for an SX130 server:

Figure 32: Machine Administration Menu: "Hardware Configuration Displays"

The following options are available:
–
–
–
For the SX servers as of the SX140 model series both system-cabinet-specific and system-
board-specific information is included in the server-specific information.
i
Partition configuration
The assignment of system boards to partition numbers can be viewed with Partition
Display or System Board Status Display under Partition/System Board Administration. The
key information which is displayed is the number of the system board, the current
partition ID and the partition ID on the next system start.
82
Display of server-specific information (Display System Information)
Display of system-cabinet-specific information (Display Cabinet Specific Information;
valid for SX130 servers only)
Display of system-board-specific information (Display System Board Specific
Information; valid for SX130 servers only)
In this example for the SX130, the server-specific information should be
displayed.
Functions of the System Management Console
U41272-J-Z385-3-76