Outputs; Logging Inputs And Outputs; Exiting Bs2000 Console Mode - Fujitsu Siemens Computers SX series User Manual

Operating BS2000 instances

7.2.5 Outputs

Outputs are made in the roll-up area (lines 2 through 23 on the screen, for dtterm 2 through
n) in the order in which they arrive. You can switch to input mode at any time. Any outputs
will then be blocked and output later.
If necessary, the output can be stopped on screen with the key combination [CTRL] [S] and
then continued with [CTRL] [Q]. You should, however, only use these key combinations for
a short time, as in extreme cases other operator terminals with the same mnemonic console
names will be blocked.

7.2.6 Logging inputs and outputs

Depending on the log level which has been set, all inputs and outputs at operator terminals
are written to a logging file. The logging file can be read and printed out (see the section
"Show/print the logging
automatically (see the function
Outputs in the KVP status lines are not logged.

7.2.7 Exiting BS2000 console mode

Enter ::c Ú or press the keys [END] and [CTRL] [d].
Ê
U41272-J-Z385-3-76
files" as of page 173). The logging file can also be backed up
"Show or modify logging options
BS2000 console mode
(G)" on page 215).
181