Permitting/Inhibiting Input And Changing A Password - Fujitsu Siemens Computers SX series User Manual

EVENT mode

7.4.6 Permitting/inhibiting input and changing a password

[F2] opens a menu with operating functions:
1 Event Function Menu
1 - Permit Input
2 - Inhibit Input
3 - Change Password
4 - Exit
The current screen window of the EVENT mode is moved into the background. Any outputs
are written to a buffer and output on screen after the menu window has been exited.
Key functions:
Ê/Ë or
[1]/[2]/[3]/[4]
[ENTER]
You can start the following activities:
1 – Permit Input
You can permit input again. The valid password will be requested. If you supply an
incorrect password, the system will respond and wait for approximately 6 seconds.
2 – Inhibit Input
You can lock the EVENT screen against unauthorized inputs. If an input is attempted in
locked status, the following message will be output:
input locked - type MENU KEY
3 – Change Password
You can change the password of the Solaris login event: You are asked to enter first
the old password and then the new password (twice for security reasons).
4 – Exit
The menu is closed.
194
Select menu line
Execute menu function
Operating BS2000 instances
U41272-J-Z385-3-76