Fujitsu Siemens Computers SX series User Manual page 309

Dynamic Reconfiguration
2. x2prtpci [-v]
The
x2prtpci
(UPA bridges), PCI cards, ports on the PCI cards, and SCSI devices of the home partition.
If the
-v
The first line in the list has the following format:
(1)
system1(01): 00-0 (80 81) 00-1 (a2) 01-3 (ee)
(1)
(2)
(3)
(4)
The line for a PCI card has the following format:
(1)
(PCI#04 at Cabinet#0,SCFA#0)
(1)
(2)
(3)
(4)
(5)
U41272-J-Z385-3-76
command lists, in compact form, the system boards, PCI bus processors
option is not specified, the list does not include ports and SCSI devices.
(2) (3) (4)
Name of the partition
Partition ID
Name of the system board (or, in XPAR mode, name of the XSB)
IDs of the PCI bus processors which belong to the system board (or XSB in XPAR
mode)
(2)
Number of the PCI slot; if PCIOB, SCFA or I/O-BOX is contained here instead of
PCI, the controller is an onboard
I/O cage in which the PCI slot is contained (SCFA = basic I/O board in the system
cabinet)
Name of the driver for the controller on the PCI card; it begins with * if no driver is
installed; the subsequent text is then a generic controller name
Instance number used by the driver
PCI bus processor ID in the physical path for the controller; the SB to which the PCI
card belongs is then obtained from the first output line
(3) (4) (5)
lpfc 1 /pci@81,4000/fibre-channel@3
Performing DR
309