Svp Emulation Messages - Fujitsu Siemens Computers SX series User Manual

SVP emulation messages

13.2 SVP emulation messages
The messages issued by the SVP emulation start with the message code SVR.
SVR0000 xxxx started with device MM, console NN, iorsf P, BS2-Sys SS
xxxx = IPL, DIPL or VIPL
Meaning
The IPL has been started. BS2000 is loaded from device MM, NN is defined as the console,
the IORSF parameter list P is used and SS is defined as the BS2000 system name.
SVR0001 xxxx returncode: IPL OK
xxxx = IPL, DIPL or VIPL
Meaning
IPL was performed without errors. BS2000 has been started.
SVR0002 xxxx returncode: yyyyyy
xxxx = IPL, DIPL or VIPL
Meaning
IPL was aborted with an error (yyyyyy = cause of error).
Response
Eliminate the error and recommence IPL.
SVR0003 unknown xxxxreturncode: yy
xxxx = IPL, DIPL or VIPL, yy = returncode
Meaning
IPL was aborted with an unspecified error code.
Response
Back up the RMAssist Trace and send it to ITS for diagnosis.
(var/opt/SMAW/X2000/tmp/rma_trace*)
SVR0004 START-xxxx aborted
xxxx = IPL, DIPL or VIPL
Meaning
The IPL has been aborted.
Response
Recommence IPL.
344
X2000 messages
U41272-J-Z385-3-76