Configuring/Changing The Partitioning; Displaying The Configuration - Fujitsu Siemens Computers SX series User Manual

Functions of the System Management Console
4.3.1.6

Configuring/changing the partitioning

At least one partition of the SX server is reserved for running BS2000/OSD. These parti-
tions are designated below as BS2000/OSD partitions.
In addition to the BS2000/OSD partitions, an SX server can include Solaris partitions.
Configuring a Solaris partition and adding or removing system boards of a partition is
carried out in the same way as for the PRIMEPOWER servers.
The necessary actions for Solaris partitions are described in the manuals
Software User's Guide
Reconfiguration – Introduction to the Procedure" [25].
4.3.1.7

Displaying the configuration

You can display the hardware configuration and the operating status of the server using the
Machine Administration Menu. This is particularly important for the Solaris part of the server.
In addition, PRIMEPOWER ServerView offers options for displaying the operating status of
the individual partitions under DomainAdmin. For further information, see the manual
"PRIMEPOWER ServerView Suite V2.2
Select System Specific Administration (see
Administration Menu (see
Then select the relevant server.
U41272-J-Z385-3-76
Functions of the System Console Software (SCS)
(SCS)" [7], "Partition Operation
– System Administration within a
figure 22 on page
figure 21 on page
Guide" [27] and "Dynamic
60) from the menu Machine
58), to list the servers managed by the SMC.
"System Console
Domain" [5].
81