Figure 50: Xconfig: Editor; Figure 51: Exceed: Start Window - Fujitsu Siemens Computers SX series User Manual

Configuration and operation
This possibility can be restricted to certain servers (only the SMC, the partitions of the
SX server, the SKP-SR and the entry-level model). To do this, you must select File
under Host Access Control List and edit the file xhosts.txt.
In this file, you should enter the server names or IP addresses of servers which are to
be authorized to display windows on the X server:

Figure 50: Xconfig: Editor

Exceed is now fully configured.
You call the X server via the Xconfig main menu or by entering Exceed in the Start bar
(Start -> Programs -> Hummingbird Connectivity -> Exceed -> Exceed).

Figure 51: Exceed: Start window

138
Remote operation via PC
U41272-J-Z385-3-76