Figure 83: "Bs2 Tapes" Subtab - Fujitsu Siemens Computers SX series User Manual

X2000 BS2Devices main window
BS2 Tapes
Configuration of BS2000 tapes
The functions are offered depending on the selected subtab:
– Configured Tapes
– Not configured Tapes

Figure 83: "BS2 Tapes" subtab

The BS2000 tape devices supported are described in the online help "BS2 tapes - Creating"
(for MBKs, see also
ROM drive (of the SMC or entry-level model) may be used as a tape device. If the conditions
regarding CD ROMs are not met (see online help), an ATTACH in the BS2000 is rejected
with IVRQ and the medium is then unloaded.
i
Create (Aab)
A BS2000 tape device can be configured.
Modify (Aa)
The selected BS2000 tape device is displayed and can be modified.
Delete (Aa)
The highlighted BS2000 tape devices are deleted.
Activate tape devices (Ga)
The highlighted and not active BS2000 tapes are activated.
Deactivate tape devices (Ga)
The highlighted and active BS2000 tapes are deactivated.
Configure BS2000 tapes (Gb)
The highlighted tape devices are configured as BS2000 tapes.
214
section "Magnetic tape cartridge devices" on page
In the case of DVD and CD-ROM drives a DETACH-DEVICE and UNLOAD-TAPE in
BS2000 do not unload the medium. The unloading must be activated manually
using the command eject or by using the menu item "Eject" in the file manager of
the Solaris-CDE interface.
The X2000 user interface
232). The DVD/CD-
U41272-J-Z385-3-76