Preparation; Opening The Server - Fujitsu Siemens Computers PRIMERGY TX120 Options Manual

4

Preparation

V
CAUTION!
Please note the safety instructions in
4.1

Opening the server

Ê Exit all applications and shut down the server properly.
Ê Press the On/Off button if the server has not been switched off by the
operating system.
Ê Unplug all power plugs.
Ê Disconnect all cables on the rear of the server.
1
Figure 2: Opening the server
Ê Remove the stabilizers from the server (see operating manual) and place the
server on its four rubber feet (1), if the server is operated in the vertical
position.
Ê Press and hold in the locks on both sides of the server (2), push the top
cover forwards and lift it up and off (3).
TX120
chapter "Safety" on page
Options Guide
3
2
13.
19