Figure 127: Examples Of Partitioning In Sx130 Servers - Fujitsu Siemens Computers SX series User Manual

Model ranges
Basic version (2 system boards)
BS2000
System board
CPU CPU
CPU CPU
BS2000
System board
CPU CPU
CPU CPU

Figure 127: Examples of partitioning in SX130 servers

Six PCI slots are available for each system board, one of which is already occupied by an
SCSI controller for connection to the system disks in each partition. Each system board is
provided with an onboard integrated Ethernet controller.
The basic version of the SX130 series model is equipped with 4 GB of memory. The default
configurations are 1024 MB of this memory for X2000 and 2048 MB of the memory for
model SX130-40C or higher. For model SX130 server and higher an 8 GB main memory
version is recommended.
Servers can be upgraded by adding CPUs. An SX130, for example, can be upgraded to
model SX130-60C by adding a total of 8 used CPUs.
After one or two further system boards have been installed further partitions can be formed.
The capacity values of a further BS2000 partition may be freely selected within the perfor-
mance stages specified for the model range. For instance, a second BS2000 partition with
35 RPF as the development and quality assurance system can be integrated in an
SX130-20C server with 88 RPF.
Models can be easily upgraded on site.
It is possible to exchange the following components during live operations (Hotswap
capability):
X2000 system disk
System control board
Air filter
Power supply modules
Fan modules
396
System board
System board
CPU CPU CPU CPU
CPU CPU CPU CPU
Solaris
System board System board
CPU CPU CPU CPU
CPU CPU CPU CPU
Full version (4 system boards)
BS2000
System board
System board
CPU CPU CPU CPU
CPU CPU CPU CPU
BS2000
System board System board
CPU CPU CPU CPU
CPU CPU CPU CPU
BS2000
System board
System board
CPU CPU CPU CPU
CPU CPU CPU CPU
Solaris
System board System board
CPU CPU CPU CPU
CPU CPU CPU CPU
U41272-J-Z385-3-76
Appendix
System board
CPU CPU
CPU CPU
Solaris
System board
CPU CPU
CPU CPU