Timed Switching On/Off Of The Server - Fujitsu Siemens Computers SX series User Manual

Machine Administration menu

5.2.2 Timed switching on/off of the server

The automatic power control system (APCS) automatically switches the server on or off –
based on a number of switching on/off schedule entries.These entries form the system
schedule.
When the server is switched on, the X2000 carrier system is automatically started if the
mode selection switch of the system is in the LOCK position (normal mode) (see SX100
Operating Manual [2]. When the server is switched off the operating systems are shut down
in this switch position. This is also understood to mean the start-shutdown of the X2000
carrier system.
For automatic IPL (Initial Program Load) of the BS2000 when the server is switched on (see
"Configuration of automatic IPL (G)" on page
(see "Evaluation of shutdown (X)" on page
entries must be made in the KPV menu.
The administration of the APCS in the machine administration menu of an SX server entry-
level model is for the most part similar to the corresponding function on the system
management console in SX servers with SMC.
i
128
You will find details on the administration of the APCS in the
server on/off on a scheduled basis" on page 66
istration Guide" [8].
Functions of the SX server entry-level models
215) or for automatic shutdown of the BS2000
216) when switching off the server, the relevant
or in the manual
section "Switching the
"Machine Admin-
U41272-J-Z385-3-76