Fujitsu Siemens Computers SX series User Manual page 365

X2000 messages
...I092 ioctl (<request>) failed, .......
The system error message is appended to the message.
Meaning
Software error: The ioctl request <request> has been aborted.
...I093 sscanf() format error '<Fname>'
Meaning
File error: The file <Fname> has an invalid format and could not be processed with sscanf.
...I094 fwrite() failed '<Fname>'
Meaning
File error: The file <Fname> could not be written. The file rights may have been set incor-
rectly or the file system may be defective or full.
...I096 fread() failed '<Fname>'
Meaning
File error: The file <Fname> could not be read. There is an error in the file format or the file
system.
...I097 fopen() failed '<Fname>'
Meaning
File error/software error: The file <Fname> could not be opened. The path rights may have
been set incorrectly, the file system may be defective or full or the file may have been
deleted.
...I098 stat() failed '<Fname>'
Meaning
File error/software error: The file status of the file <Fname> could not be determined. Either
the file system is defective or the file has been deleted.
...I190 cannot allocate enough memory
Meaning
It was not possible to reserve sufficient memory for the generation of the file system.
...I191 wrong cabinet ID: <CabId0><CabId1>...<CabId3>(must be 0...4)
Meaning
The cabinet IDs
maximum 4 entries); permitted range of values: 0...4.
...I200 illegal CHPID selection - CHPID range(s): <range> ...
Meaning
Software error: An incorrect channel group selection has been detected.
U41272-J-Z385-3-76
to
<CabId0> <CabId3>
X2000 channel connection error messages
have been set incorrectly (minimum 1 entry and
365