Preparation; Floorstand Model; Opening The Server - Fujitsu Siemens Computers PRIMERGY TX200 S4 Server Options Manual

4

Preparation

V
CAUTION!
Observe the safety instructions in the
page 15ff.
4.1

Floorstand model

4.1.1

Opening the server

Ê Terminate all applications and shut down the server correctly.
Ê If your operating system has not switched off the sever, press the on/off
switch.
Ê Pull all power connectors out of the power outlets.
2
3
Figure 2: Opening the server
Ê Open the latch (1).
The opening of the latch pushes back the side cover (2) and disengages the
hooks on the top of the side cover.
Ê Remove the side cover (3).
TX200 S4
chapter "Safety notes" on
Options Guide
1
21