X2000 Messages; Kvp Messages - Fujitsu Siemens Computers SX series User Manual

13 X2000 messages

13.1 KVP messages

The messages issued by the console distribution program (KVP) in UNIX mode begin with
the message code KVP.
KVP0000 7.500 KVP VERSION (&00) INITIALISED ON (&01) AT (&02)
&00 = KVP version number, &01 = Date, &02 = Time
KVP0001 KVP PARAMETER FILE ERROR
Meaning
The KVP parameter file kvpparam contains a syntax error, the file no longer exists or the
system has no further available storage space.
1. On starting up KVP:
If the file is present and sufficient storage space is available, the file is renamed to
/etc/opt/SMAW/X2000/kvpparam.defect. A new parameter file with the default
parameter content is then written and used by KVP.
2. When a new KVP parameter file is activated:
KVP continues to use the old parameter records.
Response
1. Rename the file kvpparam.defect to kvpparam.<system-designation> and
correct the defective entry in the file or modify the new file
kvpparam.<system-designation> using the KVP configuration.
To do this it is necessary to rewrite the logging options and all the records.
You must then activate the new configuration.
2. Correct the defective entry in the file. Then activate the corrected configuration.
U41272-J-Z385-3-76
339