Table 1: Functionality Of The Administrator User Group In The Scs - Fujitsu Siemens Computers SX series User Manual

Functions of the System Management Console
The functionality of the user groups cladmin and clmon and the partition administration
groups p0grp, p1grp, etc. described in the sections below is determined by SCS and
described in the following table. The user groups mentioned are set in the factory.
Operation
Reference to monitoring messages and config-
uration dialog boxes
System power-on indication
Power-on instruction, shutdown instruction,
and dump switch instruction to the partition
Settings for Multiple-Partition Configuration
R/W (read/write) monitoring of the OS console
screen
R/O (read-only) monitoring of the OS console
screen
Saving crash dump data
Scheduling automatic mainframe operation
Viewing the automatic operation schedule of a
mainframe
Maintenance operation

Table 1: Functionality of the administrator user group in the SCS

Comments
(1)
(2)
(3)
(4)
U41272-J-Z385-3-76
(3)
(4)
(2)
The "Adm" column designates users who belong to the user group clmon and a
partition administration group. The "Non-Adm" column designates users who
belong to the user group clmon but to no partition administration group.
Maintenance functions are offered via the System Console Machine Administration.
The functions of the Machine Administration are normally used by hardware mainte-
nance engineers. But system administrators who belong to the user group cladmin
can use these functions to check the hardware status.
RC2000 makes read/write monitoring of a partition available for a user.
RC2000 makes read monitoring of a partition available for up to 14 users.
User groups and logins
User group
cladmin clmon
(1)
Adm
X X
X -
X X
X -
X X
X X
X X
X -
X X
X -
cemainte
(1)
Non-Adm
X X
- X
- X
- -
- X
X X
- -
- -
X X
- X
45