Figure 15: Example Of A Desktop; Calling Terminal Instances - Fujitsu Siemens Computers SX series User Manual

Calling terminal instances

3.4 Calling terminal instances
The desktop generated in the previous section can have the following appearance:

Figure 15: Example of a desktop

The generated actions (e.g. BS2000 console) are called either by clicking on the button in the
CDE control panel or by activating the submenu of this button (click on the small arrow at
the top edge of the icon) and the clicking on the relevant entry.
When the BS2000 console, BS2000 dialog and Machine Administration Menu are called,
authorization is needed.
When using the password mechanism, the passwords which must be entered are those of
the relevant KVP ID (BS2000 console), the em9750 ID (BS2000 dialog) and the madmin ID
(for the Machine Administration Menu), respectively. When using the Secure Shell with a
key not protected by a pass phrase, no further specification is necessary at this place.
When using the Secure Shell with a key protected by a pass phrase the pass phrase must
be entered.
The windows which are opened are closed automatically by stopping the application
running in them. BS2000 consoles are stopped by entering ::c or [CTRL] [D] . A BS2000
dialog is stopped by logging the dialog off and then pressing the [F10] key and leaving the
em9750 emulation (with Exit). Terminate the Machine Administration Menu using the
q function (for Quit).
The windows can also be closed by clicking on the top-left corner of the window and
selecting the action Close from the context menu.
40
Functions of the Solaris-CDE interface
U41272-J-Z385-3-76