Figure 123: Starting The Functions Mirror, Csr And Psr From The Drop-Down Menu - Fujitsu Siemens Computers SX series User Manual

Solaris: system administration
The column "CSR last action" shows the date and type (save/restore) of the last CSR action
executed. If nothing has been done there are no previous actions and the column therefore
shows "-----".
The column "PSR status" shows the current status of the PSR. If no PSR is running the
status is "inactive". If a PSR is running the status is "active".
The column "Mirror status" shows the current status of the mirror with a list of the mirrored
disks:
Inactive
Okay
Error
Resync
Clicking "Tools" in the menu list of the PRIMEPOWER ServerView opens a drop-down
menu from where you can start the functions Mirror, CSR and PSR:

Figure 123: Starting the functions Mirror, CSR and PSR from the drop-down menu

Mirror
1 to 3 disks can be included in the mirror. The disks can be switched to standby or removed
completely from the mirror. An existing mirror is supported. To operate the mirror, refer to
the on-line help and the
CSR
CSR backs up system-relevant files to a file or to a tape from which they can be read. The
operation of the CSR is described in the on-line help.
PSR
The PSR physically backs up the entire system disk or individual slices. It can be operated
on-line and off-line. The operation of the on-line PSR is described in the on-line help;
operation of the off-line PSR is described in the
U41272-J-Z385-3-76
PRIMEPOWER ServerView Suite application "Tools"
No mirror has been activated.
The mirror is active.
An error condition has occurred.
The data on a newly incorporated disk are currently being updated.
section "Mirroring of internal disks in X2000" on page
section "Offline PSR" on page
224.
274.
333