Accessing Bs2000 Console Mode - Fujitsu Siemens Computers SX series User Manual

BS2000 console mode

7.2.1 Accessing BS2000 console mode

For the console inputs/outputs you require a KVP. You will find an overview of its configu-
ration in the
controlling the I/O traffic between X2000 and BS2000. You require the BS2000 console
mode described here to display the inputs/outputs.
dtterm terminal windows of the SMC or 97801 terminal windows (SINIX-TE or SKP-SR, but
not possible when the Secure Shell is used) can be used for the BS2000 console mode.
KVP IDs are assigned to the BS2000 console mnemonics. A Solaris login of the same name
exists for every KVP ID:
Example
Solaris login:
KVP ID:
It is therefore necessary to log in under one of the Solaris logins cons0..7 to access
console mode. If further KVP IDs are set up for BS2000 operation in addition to CONS0..7,
you can also use Solaris logins with the same names as these.
A KVP process which is always running in the background ensures that one console (with
CONS0) is always logged on at the BS2000 system.
Opening a BS2000 console window under the CDE interface of the console/SMC
To open a BS2000 console under the CDE interface of the console/SMC, icons have
already been created for the pre-defined logins sxadmin and bs2admin. This enables the
BS2000 console to be called easily and securely either locally at the hardware console
or when operated remotely via a PC or X server.
160
section "Functions" on page 210. However, the KVP is only responsible for
cons0
CONS0
Operating BS2000 instances
U41272-J-Z385-3-76