Integrated Console - Fujitsu Siemens Computers SX series User Manual

Functions of the SX server entry-level models

5.3 Integrated console

To use the integrated console, open the rack door and pull out the drawer with the TFT
monitor and keyboard. Fold the monitor into the upright position and switch on.
i
The rack console has two main functions:
– When the system is switched on/off the messages from the Solaris carrier system with
X2000 can be monitored.
– When the carrier system is loaded the Solaris user interface Common Desktop
Environment (CDE) is made available.
The functions of the Common Desktop Environment are explained in general terms in the
chapter "Functions of the Solaris-CDE interface" on page
stalled applications BS2000 console, BS2000 dialog, PRIMEPOWER ServerView and
machine administration are explained in the
page 40.
Details on the individual functions are given in the following chapters and sections:
– BS2000 console (KVP): see
– BS2000dialog (emds): see
– PRIMEPOWER ServerView: see
– Machine Administration: see
To shutdown the rack console, shutdown the CDE interface (select the EXIT button in the
CDE front panel) or the lock the display (select the LOCK button [lock symbol] on the CDE
front panel.
The monitor must then be switched off, folded back into the drawer and the drawer pushed
in.
i
U41272-J-Z385-3-76
When the monitor is in the upright position it is not possible to push in the drawer.
The drawer has a safety clip on the runners which must be pushed in to release the
drawer.
section "Calling terminal instances" on
section "BS2000 console mode" on page 159
section "EM9750 mode" on page 182
chapter "The X2000 user interface" on page 195
section "Switching on/off functions" on page 125
Integrated console
27, and the calling of the prein-
129