Fujitsu Siemens Computers SX series User Manual page 314

Performing DR
Dialog with the user
In a BS2000 partition a dialog with the user takes place when the -keep option is specified.
The following question must be answered here:
option is only used for system board hotswap operation. Continue ? [YES]/[NO]
Trailer run and delays
After the phases described above have been completed a trailer run takes place in the
background in which the information about the DR process is distributed over the entire
server.
As of the postadd phase in the trailer run probing actions take place for all the partition's
ports.
A subsequent DR action is accepted, but is performed with a delay, i.e. after the trailer run
has finished. Information functions such as drcstat are also affected by this delay.
Logging DR run
The following logging files are available for the (tele)service(:
–
/var/opt/FJSVdr/log/dr_op/[0-9]
Solaris DR logging files which are created once each time
-drc disconnect
–
$SMAWL_LOG/drs/[0-9]
X2000 DR logging files which are created once each time
-drc disconnect
–
$SMAWL_LOG/drstat/[0-9]
bs2drstat logging files which are created once each time
10 files are overwritten cyclically.
314
is called. The 10 files are overwritten cyclically.
(wtih
SMAWL_LOG=/var/opt/SMAW/X2000/log
is called. The 10 files are overwritten cyclically.
(with
SMAWL_LOG=/var/opt/SMAW/X2000/log
Dynamic Reconfiguration
or
drc -connect
)
or
drc -connect
)
is called. The
bs2drstat
U41272-J-Z385-3-76