Skp-Sr For Bs2000 Operation; Operation Of The Sx Server And The Smc Via Skp-Sr - Fujitsu Siemens Computers SX series User Manual

Appendix

14.3 SKP-SR for BS2000 operation

The use of an SKP-SR for the SX130 Business Server is optional.
The SKP-SR can be used for the following applications:
Operation of X2000 instances (e.g. BS2000 console) via LAN using preconfigurable
virtual screens (not possible when using the Secure Shell)
Operation of applications on an SX server with a graphical user interface (e.g.
PRIMEPOWER ServerView) via LAN (not possible when using the Secure Shell)
Operation of the SCS software (System Console Software) on the SMC
Connection of an ATOP for automated system operation
Connection of a radio clock and operation as an NTP server for the SMC

14.3.1 Operation of the SX server and the SMC via SKP-SR

Operation via SKP-SR virtual screens
If virtual screens for the SX partitions and the SMC have been configured at the SKP-SR,
then these virtual screens can be used at the SKP-SR to operate the SX partitions and the
SMC.
Operation of programs with a graphical user interface at the SKP-SR console
To start programs with a graphical user interface (e.g. PRIMEPOWER ServerView, SCS
software for the SMC) from an SKP-SR login window, you must perform the following
actions:
Remote login at the SMC under a server/partition administrator login
Reroute the graphical output to the SKP-SR console by setting the DISPLAY variables
Call the corresponding application
The corresponding commands are described in detail in
(SCS)" on page 56
PRIMEPOWER ServerView Suite" on page 196
U41272-J-Z385-3-76
for System Console Software calls and in
SKP-SR for BS2000 operation
section "System console software
section "Starting
for PRIMEPOWER ServerView calls.
409