Figure 106: Selection Of The Tape Device; Figure 107: Backup Run Of Psr - Fujitsu Siemens Computers SX series User Manual

Global X2000 functions
After completion of the disk/slice selection, select the tape device (see
backup can then be started.
PSR-X V3.0A
Oct 21 2004
Use CURSOR to move, ENTER to select, CTRL c to abort

Figure 106: Selection of the tape device

The backup is carried out by slices.The data is read, the CRC checksum is calculated and
written onto tape. The progress of the backup is logged on the screen:
PSR-X V3.0A
Oct 21 2004
16:03:40> insert PSRvolume number 1
press c to continue, q to quit (default = c): c
16:04:56> c
16:04:56> loading PSR volume
16:05:02> writing volume header
16:05:02> writing archive header
16:05:03> saving slice /dev/dsk/c0t1d0s0 'ROOT' ...
16:05:53> data saved:
Use CTRL c to abort

Figure 107: Backup run of PSR

When the end of the tape and end of the backup are reached, the backup tape is rewound,
ejected and, where necessary, a new tape is requested.
U41272-J-Z385-3-76
Save
Tape Selection: /dev/rmt/0cn
Save
1006848 KB ( 12%)
figure
Tapes
IBM 3590 15GB
>SEAGATE DAT 9SP
Offline PSR
106). The
279