Figure 102: X2000 User Interface (Bs2000 Printer) Following Printer Configuration - Fujitsu Siemens Computers SX series User Manual

Configuring printers
In the example below, a print station with the name E9017#00, operated in unbuffered mode
without character conversion, is set up on the computer bari1. The UNIX printer p9017 is
used as the physical device. -seh is specified in the Emulation options. This tells the printer
emulation to communicate with the printer via the so-called RSO spool protocol and to use
port number 2900 (print security!).

Figure 102: X2000 user interface (BS2000 printer) following printer configuration

i
256
The configured Transdata printers can be displayed by selecting the Transdata
subtab at the bottom left. Select the Local subtab if you want to display the local
BS2000 spool printers.
Global X2000 functions
U41272-J-Z385-3-76