Figure 100: X2000 Window For Creating A Bs2000 Printer - Fujitsu Siemens Computers SX series User Manual

Global X2000 functions
When you select BS2000 printer, the Create a new BS2000 printer window opens:

Figure 100: X2000 window for creating a BS2000 printer

Node
Name
Type
HC 0-F
Unit 00 - FF
MN
Device#
Device PRINTER
Sense ID
U41272-J-Z385-3-76
Computer node on which the BS2000 printer is to be set up.
Here, you specify the name of a printer which is configured in the
UNIX system and which is to be used for print output by the
emulation.
The system displays the printer type corresponding to the printer
entered under "Name".
The host connector and unit represent the unique device name at
the computer.
The unit numbers that are as yet unassigned are presented in the
selection box.
The mnemonic name represents the unique two-character device
name at the computer. Both digits and letters are permitted.
The system generates the device number from the mnemonic name
chosen by the user.
This entry is preset for printers.
The device-dependent identification code is generated internally
and displayed here.
Configuring printers
253