Parameters For Configuring An Action For A Dtterm Terminal Emulation - Fujitsu Siemens Computers SX series User Manual

Functions of the Solaris-CDE interface
Integrate the action into the CDE control panel
First create a new button in the CDE control panel to do this. Right-click on the position
at which the button is to be added. Select Add Icon from the context menu which is
displayed. An empty button is then created.
The button is assigned the action dragged onto it from the opened file manager with the
home directory.
If the button which has just been created is to be extended to include a menu (like most
other buttons on the CDE control panel), right-click on it to call the context menu again
and select Add Subpanel. A submenu is then displayed at the top of the checkbox with
the available action and an empty menu item (labeled "Install Icon"). Fill this empty
menu item by dragging and dropping the relevant action.

3.3.1 Parameters for configuring an action for a dtterm terminal emulation

The following actions for Solaris shell (not on entry-level models), BS2000 console and
BS2000 dialog are based on a dtterm terminal emulation call. This makes a window
available for actual access via further commands. Configuring a dtterm window is a very
flexible process and we will therefore first explain some of the possible parameters
concerned.
The terminal emulation is always called up by the command dtterm. If the path variable
has not been set correctly, it may be necessary to specify the absolute path
/usr/dt/bin/dtterm.
Parameters can be specified additively:
Assign a window title with -title "<title text>", e.g. -title "Solaris Shell
- Server SX150ABC" or -title "BS2000 Console".
Select a character set with -fn <font name>, e.g. -fn 9x15.
All fonts which are installed can be determined with the command xlsfonts.
Specify the terminal type with –tn <terminal type>, e.g. –tn bs2console.
Not only the previous color scheme, with output of the messages in a yellow color, but
also a color scheme adapted to the CDE, can be used when calling the console distri-
bution program KVP for the BS2000 console. Here normal messages and inputs are
output in the foreground color (black), emergency messages and questions are output
as before in red, and KVP messages are underlined.
The terminal type bs2console must be set for using these color schemes.
U41272-J-Z385-3-76
Preconfiguring terminals
35