Fujitsu Siemens Computers SX series User Manual page 212

X2000 BS2Devices main window
Create (Aab)
Configures a BS2000 disk on a selected disk partition. A disk partition is only proposed
if it is unused. This means that it is:
–
–
–
–
–
Only those disks can be created which were specified beforehand using the Assign disk
selection statement.
Modify (Aa)
The configuration data for the highlighted BS2000 disk is displayed. Some of this data
can be modified.
Delete (Aa)
The highlighted disks are deleted from the BS2000 disk configuration. The data on the
disks is not deleted.
Partition and configure BS2000 disks (Gb)
You can select one or more disks for which "partition" is displayed in the Possible Actions
column. These disks are partitioned and the partitions are configured as BS2000 disks.
The data on the disks can no longer be accessed and will be partly defective.
If the disk is connected via a fibre channel, two different disk types (D3435 and
D3475-D) can be generated; in this case the disk type D3435 is not partitionable).
Import and configure BS2000 disks (Gb)
You can select one or more disks for which "import" is displayed in the Possible Actions
column. The partitions are configured on the basis of their BS2000 parameters (e.g.
NK2). This action does not delete the data on the disk.
Label disks (Gb)
The disks are initialized with a valid partition table.
Assign disk selection (Aab)
Here you can restrict the selection of disks displayed. In the case of large disk configu-
rations this reduces the time for setting up the subregister Mconf. The "Create" action
also only offers disk partitions which belkong to this disk selection.
212
not configured as a BS2000 disk,
not active as Solaris partition,
not mountet as file system
not entered in the configuration file /etc/vfstab,
not active as a swap area.
The X2000 user interface
U41272-J-Z385-3-76