Figure 13: Window For Selecting An Icon - Fujitsu Siemens Computers SX series User Manual

Functions of the Solaris-CDE interface
Three entries are important when creating an action:
– The name of the action (subtitle of the icon)
– The icon
– The command which is triggered when the icon is activated (with a double-click)
These three entries must be entered in that order in the fields of the window Create Action.
Enter the name of the icon in the first input line Action Name (Icon Label). Use a name which
will enable you to clearly identify the action, for example, "BS2000 Console", "BS2000
Dialog" or "Solaris Shell – Server sx150part2".
Select the appropriate icon from the section Action Icons. Click on Find Set... . This opens a
new window for selection:

Figure 13: Window for selecting an icon

All the icons available on the SMC are in the directory /usr/dt/appconfig/icons/C.
Select this line with a double-click. A selection list of all available icons then appears in the
right-hand side of the window.
For this example of accessing a BS2000 console, select the icon Dtterm, since terminal
emulation is to be started on the SMC with this action.
U41272-J-Z385-3-76
Preconfiguring terminals
33