Metasyntax; Hwa Error Messages - Fujitsu Siemens Computers SX series User Manual

X2000 messages

13.5.2 Metasyntax

A metasyntax is used to avoid burdening the message text with unnecessary lists.
Text variable
If a text variable expression consists of text then this is explicitly stated.

13.5.3 HWA error messages

The HWA messages are process-independent.
...A003 mmap failed, .......
The system error message is appended to the message.
Meaning
System error/software error: A mapping error has occurred.
...A004 ioctl (<request>) failed, ..........
The system error message is appended to the message.
Meaning
Software error: The IOCTL request <request> has been aborted.
...A0011 data select error - <data_select> not in range <select_min>...<select_max>
Meaning
Software error: The value for the data selection <data_select> for the AM register is not
in the specified range between <select_min> and <select_max>.
...A100 open() failed '<Fname>'
...A100 fopen() failed '<Fname>'
Meaning
File error/software error: The file <Fname> could not be opened. The path rights may have
been set incorrectly, the file system may be defective or full or the file may have been
deleted.
U41272-J-Z385-3-76
Any text variable is enclosed in angle brackets (e.g. <variable>)
and is explained in the associated message description or at the
start of the section.
X2000 channel connection error messages
363