Backing Up/Restoring The Smc - Fujitsu Siemens Computers SX series User Manual

Functions of the System Management Console

4.5 Backing up/restoring the SMC

If you create data backups at regular intervals, you can restore your data easily in the event
of a system crash. The following sections describe the procedures for creating backups and
explain which data types must be backed up. A DAT drive is available to the SMC for storing
the backed up data.
i
The SMC supports two backup procedures. The backup cycle depends on the selected
procedure:
Backing up the system drive after regular maintenance work or after the location of the
SMC has been changed
Backing up the configuration data of the System Console Software (SCS) after the user
has been registered and/or the configuration data has been changed
!
U41272-J-Z385-3-76
SMC data (SCS software, SMC disk, Teleservice data) is saved when the system is
commissioned or after changes have been made by service staff.
WARNING!
Recovery measures after drive failures or similar events which require the system
to be recovered should only be carried out by a qualified service engineer.
Backing up/restoring the SMC
97