Initialization Script Messages - Fujitsu Siemens Computers SX series User Manual

X2000 messages
..TM002 error in channel test <test> CHPID <chpid>
CABINET ID: ? BUS ID: ? - <B-type>, SLOT ??, <D-no>
Meaning
A channel test program has detected an error:
There is no valid cabinet ID for the current CHPID <chpid>; the IOCTL request
PCHAN_CHAN_GET_LOC has been acknowledged incorrectly.
Response
Locate the error.
..TM002 error in channel test <test> CHPID <chpid>
CABINET ID: <cabid> BUS ID: <busid> - <B-type>, SLOT <slotid>, <D-no.>
Meaning
A channel test program has detected an error.
Response
Locate the error.

13.5.6 Initialization script messages

script message code:
<dev>
<proc>
<pid>
..SS000 usage: cipl <ciodstart|dump|impl|iorsf|start[<0|1..|9|A|->]|stop>
Meaning
The cipl script was called with incorrect parameters. The error message specifies the
possible parameters.
Optional arguments are specified in square brackets. The values of a mandatory argument
are specified between angle brackets and separated by vertical lines.
Response
The call must be repeated using the correct parameters.
..SS001 cannot stop 'channeld'
Meaning
Software error: The background daemon channeld cannot be stopped.
..SS002 channel initialization active, please wait
Meaning
Runtime message: The cipl script has been started while the channel system is being
initialized. The script waits until initialization of the channel system has terminated.
U41272-J-Z385-3-76
Device
Name of the process
ID of the process
X2000 channel connection error messages
379