Fujitsu Siemens Computers SX series User Manual page 261

Global X2000 functions
-lan=cs
-spool
Necessary actions when using the option -spool
– Configure an LP-EMUL printer type in BS2000
You can configure the corresponding printer emulation with the emulation option
-spool. This stores the print data in a file. At the end of the print job, the shell script
/opt/SMAW/X2000/bin/spoolcmd is started with the file name as the parameter.
You must create the shell script /opt/SMAW/X2000/bin/spoolcmd to define the
further processing of the print data file.
U41272-J-Z385-3-76
A country-specific character set is selected in the printer.
Possible values for cs are:
In Standard international
As Standard Ascii
De German
En English
Da Danish
Fr French
It Italian
Es Spanish
Ni Dutch
No Norwegian
Sv Swedish
Fi Finnish
Cy Cyrillic
The X2000 printer emulation makes it possible to gather the print data for a
print job in a file instead of sending it to a physical printer. In addition, a
UNIX shell script is started when data transfer is complete. This script
defines how the stored print data is to be processed (e.g. sent to a printer
available in the UNIX spool).
This function corresponds to the usual printer driver option
i
Print to file, i.e. the target file contains all the print data
together with all the necessary printer control characters.
Configuring printers
261