Table 14: Sx130 Series Model Range; Table 15: Partitioning In Sx130 Servers - Fujitsu Siemens Computers SX series User Manual

Appendix
The SX130 Business Server model range (basic configurations) consists of the following:
Model
SX130-10A/B/C
SX130-20A/B/C
SX130-30C
SX130-40C
SX130-50C
SX130-60C

Table 14: SX130 series model range

Servers in the SX130 series model range
The basic version of all SX130 series models has two system boards. These two system
boards together usually form the first BS2000 partition. As an option you can set up a
BS2000 partition and a Solaris partition with a system board for each. A BS2000 partition
with only one system board has fewer expansion possibilities and fewer peripheral connec-
tions than a BS2000 partition with two system boards.
Two to four system boards are supplied depending on the model version. Up to four
SPARC64 CPUs, each with 675 MHz, and up to 16 GB of main memory are available for
each system board.
The table below and the following figure shows some possible usages for the basic version
and for the expanded version of an SX130:
Basic version
Alternative 1
Alternative 2

Table 15: Partitioning in SX130 servers

1.
on special release only
U41272-J-Z385-3-76
Capacity in RPF
35/42/55
63/75/88
122
155
187
217
Existing
system boards
BS2000 partitionen
2
3
4
CPUs for BS2000/OSD
1
2
3
4
5
6
Partitioning
Solaris partitionen
1
1
1
2
1
Model ranges
CPUs for I/O (X2000)
1
1
1
1
1
2
-
1
1
-
1
1/2/3
395