Fujitsu Siemens Computers SX series User Manual page 202

Privilege concept with Role-Based Access Control
If the RBAC feature is activated in the PRIMEPOWER ServerView Suite when the user ID
is created the user ID is assigned neither access rights to the applications of the
PRIMEPOWER ServerView Suite nor to the nodes of the administration domain. User IDs
(with the execption of root) which have already been created at this time lose their access
rights. These rights must then be assigned (or reassigned) as described below:
To set or modify RBAC authorizations start the PRIMEPOWER ServerView Suite with the
root ID on the SMC. Read access to the RBAC authorizations assigned is also possible
under another user ID.
Checking and setting the RBAC flag
Ê In any application of the PRIMEPOWER ServerView Suite click on Edit -> Preferences in
the menu bar and check the RBAC flag which then appears in the window.
To permit the configuration measures described below the RBAC flag must be set. If this
flag is not set, you must set it:
Ê Click on the relevant check box and then on the ok button.
You must restart the PRIMEPOWER ServerView Suite to set the RBAC flag.
Configuring the user ID
Ê In the menu bar click on the application Domain and Administration hierarchy -> Modify
access permissions.
Ê In the User register select the user ID to be configured.
In the Applications table you then see all applications of the PRIMEPOWER ServerView
Suite and in the Nodes table all nodes of the administration domain with the current
access settings for this user ID.
202
The X2000 user interface
U41272-J-Z385-3-76